Basic Info.
Power Supply
AC380/220V, 50/60Hz
Temp. Range
-70 Degree C ~+150 Degree C
Application
Industry, School, Hospital, Lab
Heating System
Stainless Steel Radiating Heater
Inner Box Material
SUS304(Or316)Mirror Stainless Steel
Transport Package
Strong Plywood Case
Specification
800*950*800mm
Product Description
-70 Centigrade Programmable Environmental Temperature and Humidity Cycle Test Chamber
Product introduction:
Temperature and humidity test machine can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material. It is simple to operate and program easy to edit. It can show the set values and operative time.
Features:
1, Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel ,mirror finished with excellent heat resistance and easy to clean.
2, Controller imported LCD display screen can be displayed measuring values and setting the value and time.
3, Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.
4, RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.
5, Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions.
6, Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.
7, Left and right side of chamber with diameter 100mm cable port for power-on test.
8, Optional electronic humidity sensor is used on all test chambers for accuracy and minimal maintenance.
9,The French Tecumseh brand is used for the circulation system of the compressor, more effective removal of oil between the condenser and the capillary and use environmentally refrigerants ( R23, R404, R507).
10.Completely independent system separate for testing in high temperature, low temperature and constant temperature&humidity environment
Test standard
GB/T2423.1-2001 test A: Low temperature (part)
GB/T2423.2-2001 test B: high temperature (part)
GB/T2423.3-2006 test Cab : Steady damp-heat
GB/T2423.4-1993 test Db: Alternating humid heat
GB/T2423.34-2005 test Z/AD: Temperature and humidity combination
GB/T2423.3,4 requirements for the heat and humid heat cycle of the medium steady state
GB/T5170.2-2008 electric and electronic products environmental testing equipment method temperature test equipment
GB/T5170.5-2008 electric and electronic products environmental testing equipment method hygrothermal test equipment.
IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method.
IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method.
MIL-STD-202F (GJB360.8-87) High temperature life testing
MIL-STD-810D (GBJ150.3) High temperature method
MIL-STD810D (GBJ150.4) Low temperature method
MIL-STD-810D (GJB150.9-93) Moist heat testing method
.
Technical parameters:
The test conditions for device performance parameters are:
Air cooled ambient temperature at 25 ºC,Water temperature of water cooling cycle is 25 ºC,No-load (no load) |
| category | model | QTH-100C/D | QTH-200C/D | QTH-330C/D | QTH-600C/D | QTH-1000C/D |
| Internal size(W*H*D)mm | 500×500×400 | 580×750×450 | 580×750×760 | 800×950×800 | 1100×950×950 |
| External size(W*H*D)mm | 750×1650×1100 | 880×1730×1360 | 880×1730×1570 | 1100×1950×1700 | 1400×2000×2105 |
| Main performance | Temperature range | C:-40C~+150C, D:-70C~+150C customize |
| temperature fluctuation | ±0.5ºC |
| temperature uniformity | ±2.0ºC (deviation:±2.0ºC) |
| Humidity range | 20%~98%(Dry sphere temperature range+10ºC~+90ºC) |
| humidity fluctuation | ±1.5% |
| Humidity uniformity | <75% RH /≤±5%RH; >75% RH /≤±3%RH |
| Heating performance | Average about 3 degrees per minute, no load. |
| Cooling performance | C:from +20ºC to -40ºC ,Average about 1 degrees per minute, no load |
| D:from +20ºC to -70ºC Average about 1 degrees per minute, no load |
| Operating ambient temperature | Environmental temperature conditions for equipment functioning normally:+5ºC~35ºC |
| structure | Outer box material | Steel plate lacquer-full computer white |
| Inner box material | SUS304(or316)Mirror stainless steel |
| Insulation process | Outer rigid polyurethane foaming+Inner glass fiber cotton |
| system | Refrigeration mode | C: Mechanical vapor compression refrigeration-Single stage;Cooling mode optional:Air cooling (standard) / water cooling. |
| D: Mechanical vapor compression refrigeration-Overlapping type;Cooling mode optional Air cooling (standard) / water cooling |
| refrigeration compressor | Fully enclosed piston type/rotary compressor (Low noise / environmental protection) |
| cryogen | C:Environmental coolant R404A D:Environmental coolant R404A+R23 |
| circulating fan | High-temperature induction motor+Aluminum alloy centrifugal wind blade |
| heater | Reliable stainless steel regenerator |
| humidifier | Built-in stainless steel anti-corrosive heating pipe,Water plate humidification (Convenient and clean, low water consumption) |
| Control system | control method | Solidified write PLC Control system |
| display screen | 7-inch TFT true color liquid crystal display with a resolution of 800*480; hand touch input |
| Operation mode | Values and programs |
| Program capacity | 120 group programs,Each program can be set up 100 times |
| document storage | USB interface,Easy to import or export internal parameters of programs and devices ;Curve data can be derived from USB disk |
| communication | Optional LAN Network Interface,It is convenient for remote connection control and fault diagnosis. |
| Water supply | Water supply mode | Pump lift |
| water box | 5-liter / 20-liter food-grade PE tank, removable for cleaning |
| Water quality requirements | Resistance for water used for humidification≥500mΩ |
| parts | standard configuration | Diameter 100mm test hole and soft plug 2 piece;Stainless steel riser with good air permeability 2 piece;movable casters with fixed mats 4 piece,observation window 1 piece |
| protection | standard configuration | Power over-voltage overload protection;Power leakage protection switch;Test product over temperature protection (independent);Compressor overload high - voltage protection;Heater over-temperature protection;Humidifier dry burning protection;low water level protection ;Controller self-diagnosis fault picture display. |
| others | Power Supply | 100L uniphase220V; others 3 phase 4 line380V 50Hz ±10%+protective earth wire |
| Single-phase maximum current A | 18A | 18A | 18A | 22A | 26A |
| power rating KW | 4KW | 7KW | 7KW | 10KW | 10KW |
| nominal weight KG | 180 | 280 | 320 | 500 | 700 |
if you have any other request ,please feel free to contact us . it can be made base on your request;thanks!
Address:
No. 88, Jiaolian Yiheng Road, Wanjiang District, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Instruments & Meters
Management System Certification:
ISO 9001
Company Introduction:
DongGuan Q1-Test Environment Equipment Co., Ltd. (q1-test.en.made-in-china.com) was founded in year 2000, located in DongGuan, a famous industrial city. Mainly specialized in manufacturing, developing and marketing various environmental testing equipment like salt spray corrosion test machine, CCT cyclic corrosion test chamber, test chamber with constant temperature and humidity, high and low temperature test chamber(alternating), linear(nonlinear) rapid temperature change test chamber, thermal shock test chamber, high temperature oven, drying oven, high and low temperature tensile test machine, dust resistance test chamber, water chamber test simulation environment test equipment.
The produces are widely used in electronics, military Engineering aerospace, aviation, shipbuilding, automobile, communications, chemical plating, quality inspection measurement and institutions and laboratories and scientific research institutes, All devices are manufactured by GB, GJB, ICE, MIL, DIN, JIS, ASTM series of standards. The company has passed ISO9001: 2008 international quality management system certification, all appliances are has passed CE certification, products sold domestic and foreign markets, it is the domestic first-line brand manufacturers preferred test equipment.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
