Basic Info.
Power Supply
AC220/380V, 50Hz/60Hz
Usage
Salt Spray Corrosion Test
Type
Salt Spray Testing Machine
Spray Volume
1.0~2.0ml/80cm2/H
Application
School, Hospital, Lab,Factory
Service
OEM / ODM / Non-Standard Available
Salt Spray Veicle
Air+Acid Based Liquid
Transport Package
Strong Plywood Case
Specification
1200*850*500
Product Description
Product introduction:
Salt spray test chamber is to test the anti-erosion quality of the surface of all materials after the rust-proof of painting,coating,electroplating,anoding and greasing.it carries out the anti-corrosive treatment to test the corrosion resistance of the products.
Features:
ASTM B117 Salt Spray Corrosion Tester
Product introduction:The AHL Series Salt Spray Test Chamber is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing anti corrosion treatment for a variety of materials, corrosion resistance of their products. It can be subjected to neutral salt spray test (NSS), Acetate Salt Spray Test (ACSS), Copper salt accelerated salt spray test (CASS).
Features:
1. The machine is made of imported PP rigid plastic plate, with solid and firm structure, acid and alkali resistance, high temperature resistance, corrosion resistance and never aging, suitable for neutral salt spray NSS, acetic acid test ASS, acetic acid CASS and other tests Claim.
2. The use of precision plastic nozzle and conical spray device, fog uniform, fast, nozzle long life, no crystallization.
3. Using LCD touch screen, can be connected with the computer to achieve remote monitoring and operation, any switch in English.
4. comes with USB interface, you can insert the U disk download curve, historical data (can replace the recorder) (optional)
5. Spray time can be controlled internally without additional time relay.
6. Through the flow meter, high pressure valve to adjust the salt flow and compressed air pressure to ensure uniform salt fog settlement.
7. The use of manual water system, water level is insufficient with automatic replenishment function to ensure that the test is not interrupted.
Standard for:
1. GB/T 10125-1997 salt spray test
2. GB/T 10587-2006 salt spray test
3. GB/T 1771-2007 salt spray test
4. ASTM B117-97 salt spray test
5. GB10593.2-1990 salt spray test
6. QB/T 3826-1999 salt spray test
7. QB/T 3827-1999 salt spray test
8. GB/T 12967.3-2008 salt spray test
9. CNS 4158 salt spray test
10. CNS 4159 CASS Accelerated acetic acid copper salt spray test
11. GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray test
ISO-9227, ASTM-B117, JIS-D0201, H8502, H8610, Z2371, GB/T10125
Technical parameters:
Button Model | AHL-60-SS | AHL-90-BS | AHL-120-NS | AHL-160-NS | AHL-200-NS |
LCD touch screen Model | AHL -60-TS | AHL -90-TS | AHL -120-TS | AHL -160-TS | AHL -200-TS |
Inner size (mm) | W | 600 | 900 | 1200 | 1600 | 2000 |
D | 450 | 600 | 850 | 850 | 950 |
H | 400 | 500 | 500 | 550 | 600 |
External size (mm) | W | 1130 | 1460 | 1900 | 2300 | 2700 |
D | 630 | 910 | 1150 | 1150 | 1350 |
H | 1070 | 1280 | 1500 | 1550 | 1600 |
Lab Capacity(L) | 108 | 270 | 480 | 800 | 1440 |
Saline Capacity(L) | 15 | 25 | 90 | 90 | 120 |
Inside Temperature | (NSS ACSS) Test temperature : 35°C±1°C |
(CASS) Test temperature : 50°C±1°C |
Pressure Bucket Temperature | (NSS ACSS) Test temperature : 47°C±1°C |
(CASS) Test temperature : 63°C±1°C |
Brine Temperature | (NSS ACSS) Test temperature : 35°C±1°C |
(CASS) Test temperature : 50°C±1°C |
Test solution | NSS: pure water + NaCl (PH6.5~7.2) |
CASS: Pure water + NaCl + CuCl (PH3.0~3.2) |
Compressed Air Pressure | 2kgf/cm2 | 2kgf/cm2 | 6kgf/cm2 | 6kgf/cm2 | 6kgf/cm2 |
Power | AC 220V , 15A,1Ф, 50HZ |
Optional accessories
1. Control Panel : Key panel / LCD panel (optional) |
2. Working way: steam heating type / air heating type (optional) |
3. Salt concentration meter |
4. Air compressor |
Shipping configuration
Detailed operating instructions | 1 PCS |
NaCl reagent (500g/bottles) | 4 PCS |
Salt water modulation barrel (10 kg) | 1 PCS |
80cm² standard collection cup | 1 PCS |
V-frame for material placement | 1 Set |
Instructions for installation of water and electricity
1. Customers need to own gas or air compressor
2. Compressed air: more than 3KG
3. The saline solution requires pure water or distilled water
4. The place where the machine is installed is required to drill a exhaust and drain hole with a diameter of 10cm in the corner or wall of the wall to the outside.
5. Power requirements: voltage 220V single-phase current 15A;
The user is required to configure the appropriate air or power at the installation site, and the switch must be used independently for the equipment.
6. Installation site: ground level, good ventilation;There is no strong vibration around the equipment; There is no strong electromagnetic field around the equipment;There is no flammable, explosive, corrosive material and dust around the equipment.
If you are interested in our products, please feel free to contact us. Thank you!
Address:
No. 88, Jiaolian Yiheng Road, Wanjiang District, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Instruments & Meters
Management System Certification:
ISO 9001
Company Introduction:
DongGuan Q1-Test Environment Equipment Co., Ltd. (q1-test.en.made-in-china.com) was founded in year 2000, located in DongGuan, a famous industrial city. Mainly specialized in manufacturing, developing and marketing various environmental testing equipment like salt spray corrosion test machine, CCT cyclic corrosion test chamber, test chamber with constant temperature and humidity, high and low temperature test chamber(alternating), linear(nonlinear) rapid temperature change test chamber, thermal shock test chamber, high temperature oven, drying oven, high and low temperature tensile test machine, dust resistance test chamber, water chamber test simulation environment test equipment.
The produces are widely used in electronics, military Engineering aerospace, aviation, shipbuilding, automobile, communications, chemical plating, quality inspection measurement and institutions and laboratories and scientific research institutes, All devices are manufactured by GB, GJB, ICE, MIL, DIN, JIS, ASTM series of standards. The company has passed ISO9001: 2008 international quality management system certification, all appliances are has passed CE certification, products sold domestic and foreign markets, it is the domestic first-line brand manufacturers preferred test equipment.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.