Basic Info.
Certification
CE, ISO, SGS
Controller
Programmable LCD Display Touch Screen
Power Supply
AC380/220V, 50/60Hz
Temp. Range
-20 Degree C ~+150 Degree C
Application
Industry, School, Hospital, Lab
Humidity Range
20% -98% Rh
Transport Package
Strong Plywood Case
Specification
300*300*300mm
Product Description
27L Small Environmental Temperature And Humidity Test Chamber
Product introduction:
Desk type chambers are suitable for testing small parts, such as Semiconductor, computer components, automobile sensors and cellular phone parts.
These chambers combine excellent performance with compact design, offer flexibility, uniformity and control accuracy required for cost effective testing, which perfect for research and development or personal point-of-use testing.
Available in several sizes, desk type chambers allow you to cost effectively and select exact chamber that best meets your environmental test conditions.
Features:
1, Desk type chamber is optimized to save space while offering a wide test area, relatively light weight allows setup almost everywhere.
2, Full variation to select from 3 temperature ranges (0deg, -20deg, -40deg), and standard volumes (27L and 80L) for selection to fulfill customers' applications.
3, Cable port is available on both left and up side to allow wiring for power on testing samples.
4, Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions, optional viewing window is available in left side of chamber.
5, Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel with excellent heat resistance and easy to clean.
6, HL-1000 touch screen controller is designed to save chamber programming and setup time with temperature limit and alarm to protect your product.
7, Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.
8, RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.
9, Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.
10, Left side of chamber with diameter 50mm cable port for power-on test.
11, Left side of chamber with diameter 50mm testing hole for power-on test.
12, Optional electronic humidity sensor is used on all test chambers for accuracy and minimal maintenance.
Conform following standards:
IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
MIL-STD-202F (GJB360.8-87) High temperature life testing
MIL-STD-810D (GBJ150.3) High temperature method
MIL-STD810D (GBJ150.4) Low temperature method
IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method.
IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method.
MIL-STD-810D (GJB150.9-93) Moist heat testing method
Specifications:
Specifications:
Model | QTS-27TA (B/C) | QTS-80TA (B/C) |
Interior Dimension W × H × D | 300 × 300 × 300mm | 400 × 500 × 400mm |
Exterior Dimension W × H × D | 530 × 780 × 750mm (Exclude height of motor cover) | 650 ×850 × 8500mm (Exclude height of motor cover |
Interior Volume | 27L | 80L |
Control Mode | Balanced Temperature and Humidity Control System |
Operating Temp. & Humid. Range | +5deg ~ +35deg; <85%R.H. |
Temp. range | A=0deg, B=-20deg, C=-40deg~ +100deg(150deg) |
Humid. range | 30% ~95%R.H. |
Temp. & Humid. fluctuation | ±0.5deg; ±2.5%R.H. |
Temp. & Humid. uniformity | <2.0deg; ≤3%R.H. |
Temp. & Humid. Deviation | <1.0deg; ≤2%R.H |
Temp. Heating Time | 0deg ~ +100degwithin 30min; -20deg ~ +150degwithin 45min |
Temp. Cooling Time | 20deg ~ -40degwithin 60min; 20deg ~ -70degwithin 85min |
Power Supply | AC380V, 50/60HZ, Three-phase (Specified by User) |
Exterior Material | stainless steel with baking paint |
Interior material | SUS304# Stainless steel |
Insulation material | Rigid Polyurethane foam |
Refrigeration system | Mechanical cascade refrigeration system; Fin type radiator |
Circulation system | Mechanical convection system |
Humidification Water Supply | Automatic water regulating, recoverable supply system, water shortage alarm system |
Water quality | Distilled water only, 20L Water tank capacity |
Controller | HL-1000 Touch Screen Controller |
Safety devices | Overheat protector Switch, Compressor overload protector Switch water shortage protector Switch, Humidifier protector Switch Fault alarm system |
Accessories | Viewing window, Chamber Illumination, Cable port ø50mm, Product shelf slides 2 pieces, universal casters HL-1000 touch screen controller |
Note | 1, The performance values are no specimen inside the test area. 2, At 20deg ambient temperature, relative humidity 65%RH, rated voltage 3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001 4, The above specifications are for reference only. |
if you have any other request ,please feel free to contact us . it can be made base on your request;thanks!
Q1-TEST main products are:
Address:
No. 88, Jiaolian Yiheng Road, Wanjiang District, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Instruments & Meters
Management System Certification:
ISO 9001
Company Introduction:
DongGuan Q1-Test Environment Equipment Co., Ltd. (q1-test.en.made-in-china.com) was founded in year 2000, located in DongGuan, a famous industrial city. Mainly specialized in manufacturing, developing and marketing various environmental testing equipment like salt spray corrosion test machine, CCT cyclic corrosion test chamber, test chamber with constant temperature and humidity, high and low temperature test chamber(alternating), linear(nonlinear) rapid temperature change test chamber, thermal shock test chamber, high temperature oven, drying oven, high and low temperature tensile test machine, dust resistance test chamber, water chamber test simulation environment test equipment.
The produces are widely used in electronics, military Engineering aerospace, aviation, shipbuilding, automobile, communications, chemical plating, quality inspection measurement and institutions and laboratories and scientific research institutes, All devices are manufactured by GB, GJB, ICE, MIL, DIN, JIS, ASTM series of standards. The company has passed ISO9001: 2008 international quality management system certification, all appliances are has passed CE certification, products sold domestic and foreign markets, it is the domestic first-line brand manufacturers preferred test equipment.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.